The completion of my new smelter project.

I've been wanting to get this project done since the fall of last year when I came across an empty propane tank still with the old valve being thrown out by someone at the dump. I started with 20 feet of 1-1/4" x 1-1/4" angle iron. Cutting, wielding, took about 6 hours.cutting the tank about 10 minutes after filling it with water an dish soap and flushing it two or three times over the course of 2 to 3 days. Should hold well over 100 pounds. I'm looking forward to getting many 10 pound bricks out of this setup quickly and not having to be bent over either. Legs are 32 inches in height. Hope this project will be inspiring to many.