I take the barrel off the gun and put 3 drops of dawn soap in a gallon of very hot water. I set the breech end into the bucket and run a tight patch up and down inside the barrel until it is drawing hot soapy water up the barrel and getting it too hot to hang on to. Then run hot water alone through it with a clean patch next then dry it with the blow drier. Before reassembly I run a patch with bore butter up and down multiple times. Flip the patch over and rub the metal down and then reassemble.


"Arguing on the internet is like playing chess with a pigeon. You may be good at chess, but the pigeon is just going to knock all the pieces down, take a crap on the table, and strut around like its victorious."--Anonymous