I've kryloned all of my most used. My 700 what i did was take barreled receiver out tape up crown,safety,trigger and then used non chlorinated brake kleen to get all oil off,same thing with the adl stock. I taped barrel channel and then brake cleaner the entired stock wuth buttpad off. After that i hung both up and khaki kryloned for base. Dried then repeat. Then i laid pinestraw/leaves/twigs on both while on cardboard and sprayed brown,then repeat other side. Then i moved pattern abd rearranged and went olive drab. After all said and done i reinstalled everything then sighted in. I touch up when seasons change or 2 my liking. Been this way for years. True flat looking. If not careful you will lose it in woods if set up by tree when relieving yourself.