Velvet
by Mbrock. 04/28/24 09:16 PM
|
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
69 registered members (JLMiller, roll_tide_hunts, bambam32, Lonster, quickshot, JohnG, wareagul, Ol Backwoods Boy, Ben2, just_an_illusion, Hunting-231, HappyHunter, ParrotHead89, blade, Flyliner, M48scout, dsmc, DoubleShoalsJR, leroycnbucks, bamaeyedoc, 7x57_Mauser, 2walnuts, GUT_SHOT, csg1994, snakebit, CCC, deadeye48, AU338MAG, outdoorguy88, KnightRyder, BC, AKB, crenshawco, Chiller, SouthBamaSlayer, mossyback, timberwolfe, Bigwhitey, Dean, Shane99, RCHRR, MoeBuck, AU7MM08, AL18, Ron A., MadMallard, Tree Dweller, Drycreek, CrappieMan, BamaBoHunter, Bustinbeards, Jbf, CatfishJunkie, gman, GATA87, k bush, DuckDown11, BCLC, fourfive45, 10 invisible),
781
guests, and 0
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
Re: Anybody loading for 6.5 Creedmoor
[Re: deadeye48]
#2047461
03/05/17 03:14 AM
03/05/17 03:14 AM
|
Joined: Nov 2014
Posts: 58 North AL
Mike_W
spike
|
spike
Joined: Nov 2014
Posts: 58
North AL
|
Already tried those areas on the load scale and it just wouldn't shoot 39.5 was the sweet spot Using Nosler brass, CCI primers and the Hornady 143gn ELDX being pushed by 39.5 gns of H4350 Will shoot one ragged hole 5 shot groups from a custom build I finished in November of last year 39.5 gr H4350 behind the 143 ELD-X is a good place to start, but you're likely going to find better nodes up between 41-43 gr in terms of velocity, SD, and ES. I run 41.8 gr H4350 under 143 ELD-X using Hornady brass that I anneal after each firing, using a CCI 200 primer. Under half-MOA out past 800 yards... Interesting
|
|
|
|