Shot my bow and 2 of 15 shots went 3 ft high. Each time some felt on drop away rest was moved like the picture below. Do I need to replace the rest or something I can do to it. Take the felt off etc, Never had a drop away before?

The rest isn’t dropping fast enough. The cord has either stretched or if you have a clamp securing it to the cable, it has moved.

This is what I have shaw

See if this helps you.

Best thing you can do is take it to your local shop. The felt will need to be replaced too. Your timing cord will most likely need to be replaced as well. The jackhead that set it up cut the excess off flush with the rest.

Looks like a nice setup. I agree with Shaw take it to a pro.

I replaced the felt and it has not done it again. Maybe that was the problem but I will get it checked next week. If ai shoot at one and it does it at least I will shoot way over it

I watched your video shaw and this seems to be set right as it moves to straight vertical just before full draw

Maybe you got lucky and the felt just came loose.

WhEn I had an issue, QAD sent me new felt no questions asked.