I have an older polaris ranger 400 utv. I had a custom windshield put on years ago, but I am afraid that the aftermarket or Polaris roofs may not fit over the windshield and the back window shield. I am wondering if any of you have made a top or had one custom made for your ranger.? appreciate all your ideas

I would've installed a roof before a windshield lol. But i would call around and see if a dealer has a roof that would fit your model (which might be hard) and carry it over there and see if it'll work or not.

I bought a piece of 3/16 inch diamond tread material and had it cut to size and bent for a top on a old Ranger I had. It was very heavy duty and I had maybe a 100 bucks in it. I also, primed it with a etching primer and painted it black.

I used a piece of leftover plywood, painted it black and attached with u-bolts. Cost was minimal and it has held up very well.

A guy I know did the same thing except covered it in bed-liner. He mounted lights to it and everything. It looked great.

Not a bad idea

Dad has same thing with plywood. He had auto glass windshield mounted on it and bolted the plywood on. He had piece of sheet metal on it but it was loud with limbs and such hitting it. Plywood works perfect.

I put a soft roof on my mule. That might be a good option for you.

Buddy has one with a 35 mph speed limit sign bolted on top. Fit perfect.

Here you go. If you dont like it, your out $30

I gave someone the dimensions / bends on the Rhino I used to have and had a metal "bending" shop make me one. Made one from aluminum diamond plate. Primed and painted it black and would do the same again.

dumpster lids fit a Kawasaki mule perfectly!