What size ATV do you pull your disc with?
what kind of disc do you use?
Does it work well enough?

We had a 4ft tufline and it did great. The only problem was once it got to cuttin deep you better have a 4x4 four wheeler or side by side to pull it. But for those hard to reach places that you couldn't get a tractor it was perfect.

I have a 6 row disc that my fourtrax 300 pulls, it is a small disc and i try to go out there when the ground is moist. A fourtrax 300 is air cooled so you have to be careful but it works. If you get a liquid cooled quad you really dont have to worry about it.

I use one of those tuff lines too. On the second day after a rain while the soils is still not baked hard yet,..it cuts pretty well.

It works all the time, but when the soil is still a little loose/moist it gets the job done easier and quicker.

I use a 500 Sportsman with it too. No problems.

I have a set of king kutter disc. They've been going strong for 10 years now. I always pulled mine behind my 360 prairie with no problems, but if the soil was real loose 4wd came in handy in the corners, cause them suckers will dig..

Yes, yes you do.

First off pulling a disk can work the pizz out of one, and then you combine that with chaff and dust covering the radiator you can run it hot in a headtbeat.

I don't destroy my ATV with farm implements. I have a tractor for disking. I use my ATVs as they were intended.