Looking to have one made soon. Something like a 50x80 that I can mount in front of the office. Anyone here do this type work? I'm in Bham area.

Drive down morgan rd toward bessma, after you go under 459 go thru tworedlights (the second one is where hilltop hits morgan rd) as soon as you go thru it, theres a building on the left called lions den. They do it all.

If they cant do it, check with promotional creations on hwy 31 in vestavia

I'm guessing that those measurements are in inches, not feet...

I'd go with 48"x 96" or 60" x 120" I'm pretty sure that sign board comes in standard widths the same as metal does. If you stay with the standard measurement you'll get more sign for less money because there won't be as much waste.

I don't know where your office is or what you exactly have in mind for a sign but IMO a 5' x 10' sign is a good size for visibility on a slowly traveled 2 lane road. That's the size sign that I am about to start building the frame for, for our business. If you are on a high speed stretch of 2 lane or a 4 lane, you might want to consider going larger.

I've seen that place Hunterturf is talking about but haven't used them. I've used the sign guy in pelham and he's a good guy and I thought he was reasonable.

http://www.pelhamsignguy.com/

Thanks guys. Appreciate the suggestions!

I have a buddy I hunt with makes signs and he is in Birmingham on 4th avenue. He did all of my wife's campaign signs and we had some that were 6x8. Does great work with digital printing. His business is mid-state printing doug jowers

I work at fravert services in homewood. Sometimes a little pricey but we do it all from install to design and fabrication. And all sized from small plaques to hospitals and colleges

Amerson Engraving in Hueytown. Parnell will do a great job for you.