Got a question if you do. Seems like the bar with the cable rollers has moved/bended. I no longer have enough clearance for the fletchings to clear the cables, regardless of how they are turned. This happened sometimes between hunts this week. Is this bar on your bow straight or does it bend towards the left on a right hand bow?

Just take it to the shop or Google a picture of one

Can't find a clear picture of the right angle anywhere, but am taking it to a shop in the morning.

Are you sure your rest hasn't moved? It would take a helluva lick to bend the roller guard arm.

I agree Shaw. Can't understand it really. Moved the rest to get it back in line with the sight but my fletchings still barely hit the cables. Used to be able to shoot with cock vane up and had plenty of clearance on the cables and now trying to shoot with the cock vane out and don't even have full clearance. In 28 years of bowhunting I've never seen this happen.

Take a picture and post it

Check the roller arm screws where it attaches to the riser to see if they are tight and check the arm itself for cracks. For reference, a starting point for setting the arrow rest center shot should be the center of the grip. If you line your rest up like in the pic I PM'd you and the fletches are still touching, take it to your dealer and have it checked out. If the bow has took a lick hard enough to bend that roller arm, you would know it. It's machined aluminum and I wouldn't rule out it being cracked. I have heard of that happening, but not on the Z series bows.

Thanks Shaw for all your help! I'll let you know.