Actually, the draw length is correct. The draw length appears to be to long because because the limb bolts are backed out as far as the manufacturer will allow thus reducing the tension on the cable. When my daughter draws the bow back & the module hits the cable she continues to pull. The cable gives a little & the bow goes past full draw. The bow does fit her when she doesn't try to over do it. The bow has 20-40# limbs & when backed out goes down to 18.5#'s. The draw length is 18" which is as short as it will go & what she measures. As she gets stronger & the poundage goes up this should become less of an issue.