Anybody build these or have input. Would like to get one I could move a bumper pull and a gooseneck with. Mainly for moving in and out of building.

Aaron, u got forks for it already? If so, drill a 7/8” hole (or whatever size stud the ball u buy has) in one of them and put a ball in it. Would save some money. I think there is one that clamps to a bucket also. Just some thoughts. A gooseneck, depending on how big your machine is and heavy the trailer is, may be a fuzz heavy with a ball on the end of a fork. I’ve never seen anybody with the attachment you posted though.

Here’s another option though if u go that route
https://m.vevor.com/quick-tach-moun...10806484736?language=en&currency=USD

Or weld a ball to the top of your bucket that is up in the dump position. A ton of options besides wasting money on another attachment.

Just weld a receiver hitch bracket on top of the bucket.
That way you can put in a 3-way ball hitch or different types of hitches.

There ya go

I built a clamp on for mine Just clamp it to the bucket or a fork and go

That's a good idee . You could have a ball , a hook , rig a jib crane , lota things you could do with a receiver . Could also make a frame out of channel that would slip on and clamp on both forks with a receiver on it , very strong . One on forks would go lower .

Just cut a hole in a one of the forks if you have a set and screw a ball in it. You can move whatever you