Well run up on another strange deal yesterday. I had unstopped a bridge for the county last year on 33 . It was so bad I had to snatch block a middle buster through it and they sent the gradall in and scooped a ton out and hauled it away. I stuck a 16 foot cattle panel in each end as best as I could in the quick sand I was standing in. Anyway I go by there yesterday and the water is 12 inches below the bridge on the upstream side and 38 on the downstream side. I had to hook my truck to the upstream panel and pulled it out. They had it dammed up so bad it took us 4 hours to bust it all loose it was horrible. Anyway I am going to build a heavy frame with smaller mesh wire the exact size of the bridge opening and push it straight down with my tractor. Any ideals how they did that with a cattle panel on each end? There had to be an opening somewhere deep or they had to climb over it. Operation epic fury is fixing to be opened up on them though