|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
1
|
2
|
3
|
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
75 members (jmj120, Marengo hunter, fish_blackbass, eskimo270, Shmoe, Dr595, Bustinbeards, doublefistful, 3bailey3, 2walnuts, georgiaboy1970, Turkeyneck78, C3SEAST, G/H, znix123, Drycreek, rhino21, CCC, Guru, deerman24, dirtwrk, Mike32, Bread, abolt300, akbejeepin, tucker07, sidehitter, bowkl, Gobble4me757, kyles, Sasquatch Lives, brushwhacker, cartervj, sasquatch1, hgmike, AWT6, JohnG, Young20, YB21, Floorman1, Obsession, twaldrop4, Auburn_03, Bmyers142, Dubie, Standbanger, TideWJO, BPI, trlrdrdave, BhamFred, metalmuncher, JSOG47, NoHuntin, Mack1, Richard Cranium, jeffhhub, gog1015, courseup, DGAMBLER, mcninja, birdcarver, dtmwtp, klay, NotsoBright, Whitetaillane, Solothurn, SurveyinAL, canvasback, gatorbait154, Cactus_buck, COOTER, 4 invisible),
1,421
guests, and
0
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
Joined: Jan 2014
Posts: 4,477
10 point
|
|
10 point
Joined: Jan 2014
Posts: 4,477 |
Anybody got a 742 Woodsmaster 30-06 with the 22" barrel stuck back somewhere? Just needing a barrel, figured someone has one laying around with a busted bolt.
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
Rebarrel it to a 35 whelen
|
|
|
|
|
Joined: Jan 2014
Posts: 4,477
10 point
|
|
10 point
Joined: Jan 2014
Posts: 4,477 |
Rebarrel it to a 35 whelen Gotta find a barrel first. The barrel on mine is 16.5" long.
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
I found a place a few years back that done them for the 742 , 7600 , ect . Can't remember where now . Seem like I remember the barrels be about $250. I get a chance I'll see if I can find them again. I was looking for a savage bolt action at the time
|
|
|
|
|
Joined: Nov 2019
Posts: 1,004
6 point
|
|
6 point
Joined: Nov 2019
Posts: 1,004 |
You got a deer rifle to trade for one. I have one I haven't shot in 15 years.
|
|
|
|
|
Joined: Oct 2017
Posts: 280
4 point
|
|
4 point
Joined: Oct 2017
Posts: 280 |
Try everygunpart.com or gun busters you will find one I believe on one of these sites
|
|
|
|
|
Joined: Jan 2014
Posts: 4,477
10 point
|
|
10 point
Joined: Jan 2014
Posts: 4,477 |
You got a deer rifle to trade for one. I have one I haven't shot in 15 years.
I don't, but shoot me a price on it.
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
Last edited by Frankie; 12/06/23 09:20 PM.
|
|
|
|
|
Joined: Dec 2014
Posts: 902
6 point
|
|
6 point
Joined: Dec 2014
Posts: 902 |
good website to know Frankie, looks like great prices
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
Remington going under was the worse thing to ever happen in the gun industry .
|
|
|
|
|
Joined: Apr 2022
Posts: 2,153
8 point
|
|
8 point
Joined: Apr 2022
Posts: 2,153 |
Remington going under was the worse thing to ever happen in the gun industry . Not really.....the quality of the firearms slowly did them in. At least now folks won't be tempted to buy new junk.
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
Remington going under was the worse thing to ever happen in the gun industry . Not really.....the quality of the firearms slowly did them in. At least now folks won't be tempted to buy new junk. they all make junk cheap models , just dont buy those . ive had a few Remington never had a problem . i got a marlin they made it shoots as good as any iv ever owned . really the trigger might be a litte better
|
|
|
|
|
Joined: Oct 2008
Posts: 8,210
14 point
|
|
14 point
Joined: Oct 2008
Posts: 8,210 |
If you find a barrel, be sure to check the headspace with your bolt. It may or may not be in spec.
I'd try to find a barrel and bolt combo from the same gun if possible.
That makes the search much more difficult though
There are two types of gun enthusiasts ... Those who have been F#CKED by PTG and those who will be!
~ unknown
|
|
|
|
|
Joined: Apr 2000
Posts: 18,162
Old Mossy Horns
|
|
Old Mossy Horns
Joined: Apr 2000
Posts: 18,162 |
If you find a barrel, be sure to check the headspace with your bolt. It may or may not be in spec.
I'd try to find a barrel and bolt combo from the same gun if possible.
That makes the search much more difficult though no doubt he changes the barrel a gun smith needs to do it . id have him check the chamber to see if it pitted too .
|
|
|
|
|
Joined: Oct 2008
Posts: 8,210
14 point
|
|
14 point
Joined: Oct 2008
Posts: 8,210 |
If you find a barrel, be sure to check the headspace with your bolt. It may or may not be in spec.
I'd try to find a barrel and bolt combo from the same gun if possible.
That makes the search much more difficult though no doubt he changes the barrel a gun smith needs to do it . id have him check the chamber to see if it pitted too . Definitley check the chamber. I've worked on a pile of those things and I think maybe 2 didn't have rust in the chambers. Fortunately I was able to polish out all but 1 and get them back in service. The 1 was so bad it was sold for parts.
There are two types of gun enthusiasts ... Those who have been F#CKED by PTG and those who will be!
~ unknown
|
|
|
|
|
Joined: Jan 2014
Posts: 4,477
10 point
|
|
10 point
Joined: Jan 2014
Posts: 4,477 |
Yea they are pretty hit or miss of finding a decent parts (gun). Like an idiot kid, I cut mine off to 16.5" years ago and now wish I hadn't of.
|
|
|
|
|
Joined: Oct 2017
Posts: 280
4 point
|
|
4 point
Joined: Oct 2017
Posts: 280 |
Did you check the websites I posted
|
|
|
|
|
Joined: Oct 2017
Posts: 280
4 point
|
|
4 point
Joined: Oct 2017
Posts: 280 |
|
|
|
|
|
Joined: Oct 2023
Posts: 290
4 point
|
|
4 point
Joined: Oct 2023
Posts: 290 |
Gundoc, if the headspace is a bit too deep couldn't you face off the reciever side of the attaching lug? If it is too shallow, a finishing reamer would clean it up, yes/no??
Remember: It aint what you shoot...it's how you shoot it.
|
|
|
|
|
