What is the go to torque wrench for mounting scopes and torqueing down the actions screws. This would be for field and shop use.
Fix it Sticks are probably the most common on competition circuits. Borka Tools kit is nice but he’s temporarily stopped making them. Wiha TorqueVario is a nice screwdriver form factor setup.
I give those options because they have the range you need for typical gun stuff, as low as 15 inch lbs for scope rings (and lower for tiny screws), 40-45 for picatinny cross bolts, and 60-75 for action screws holding actions in a stock. SnapoOn doesn’t offer that range in any of its products; it takes two different ones to do 10-50 and 50-200.
