I will say from experience if your running an track machine with out counter rotate tracks be mind full of what the track that stationary while turning is parked. I wasn't paying attention and was sitting on a volleyball sized privet hedge about 15ft long I pushed over and I turned and the track that was on the tree was stationary but swung that tree around quick and tore my fence that I was saving all to hell broke t post off and the bottom 2 strand of barbed wire on a 5 strand fence then I was pushing a few minutes later and had a limb come in the operating station and pull the steer lever back and caused it to turn to the left and brake the top 2 strands of barbed wire and bend the piss out of more t post all on the same fence so we took what I didn't tear to peices up and put it back up after I got done. That made me want foot steer instead of hand steer and be mindful of what I was parked on. I will say you need 2 peices of equipment big enough to pull the other out when you get one stuck