Originally Posted By: Coy1085
Thanks a ton for all the Feedback guys. Guess I値l start looking for a Setup. To make sure I知 going for the right things, what all do I need other than a Reloading Press, Case Cleaner & Trimmer, Reload Dies, Powder Dispenser & Scale, Calipers & Brass. Or does all of this come in one of the Reload Starter Kits y誕ll have mentioned? Either way, I really appreciate your help & input! Thanks

Blake


Just to start,you don't need a case cleaner,trimmer,or powder dispenser.

Cases won't need trimming until 3rd or 4th loading,maybe more.You just check them and see.You can weigh every charge,I do anyway. You also don't have to tumble brass unless you are picking up really bad stuff off the ground which I wouldn't anyway,not knowing if it had been shot several times by another reloader and discarded.

All you will need is your components,bullets,powder,primers,case lube,press,dies,powder funnel,brush to clean primer pocket.

You will need a digital caliper from Harbor freight, a loading trey to hold and separate cases which you can make with a board and drill. You will also need a priming tool if your press doesn't have one.

You will need something to dip powder. I bought a lee dipper kit for my first witness in measuring. A powder trickler is helpful but you can get by without it.

If your brass is old and corroded green,you can clean it with 0000 steel wool.Just tarnish doesn't hurt anything.


Last edited by R_H_Clark; 11/20/17 04:15 AM.