Aldeer.com Forums Alabama Deer Talk Aldeer Bow Talk home made lighted knocks

were can you get the stuff for them in huntsville

I found the supper glue and 5min appoxy at Walmart. Then I got the knocks and lights at Academy..

Got it to work.

Tip... use very little super glue. it don't take much. if you use to much it will mess up the contact.......

You can get the thill lights at Gander Mtn. CD.

I BOUGHT 3 AND ONLY GOT ONE TO WORK RIGHT. I THINK I USED TO MUCH GLUE. DO YOU HAVE TO DRILL OUT THE NOCK THAT GOES OVER THE LIGHT TO HAVE A SLIP FIT. THE ONE I GOT WERE PRETTY TIGHT

I did drill it out. I finally got the third one to work.
Reminder: it only takes a smear of supper glue. the excess glue will get on the contact and ruin the light.
Also: The compression part of the knock has to be very tight. if not the light will break loose from the upper end of the knock and slide down your arrow shaft on impact. If this accures then you have to remove the insert and use a gun cleaning rod to push the light back out....