Anybody have a per gallon mix rate for this?
using in clover

Good question. Everyone will give you a "per acre" rate, but I don't know many hunters that have their sprayers dialed in that tight.

Buzzard, fill your sprayer tank with water. Spray one acre. Whatever is missing is what it takes you to spray an acre. You just have to stay in that gear and rpm. Pretty easy. My 55gal sprayer will get over 3acres if im in low 4th gear running 2500 rpm.

The label should give you ratios for target weeds. I’d select the rate appropriate for the most difficult target present and am start there. Gallons per acre will vary wildly from individual to individual based on equipment used and the speed and efficiency of application.
My best suggestion is to give it a water only test run. See how many gallons you use at a given speed to cover x-area. Apply that to your equation with regards to how much product you need in your mix.

I think it’s 3 oz per gal but I can check when I get home and let you know for sure. I wrote it on the side of the jug for spot spray applications.

Thanks Guys,
Strictly, that is what I was thinking. If you find it let me know.
Thanks!

This is the way to do it. Nobody can give you an amount per gallon that will be anywhere close to right. The amount of water you use is irrelevant unless you go to extremes. The amount of chemical per acre is all that matters, and you can put enough to do an acre in 15 gallons or 100 gallons.

Or simply use the 1/1000th acre calibration method and save from riding around wasting all that water. Takes maybe 15 mins

Explain please (for the non farmer types).

Measure your spray tip spacing. Usually 15-20” spacing. 341’ for 15” spacing and 262’ for 20” spacing. Put flags out on those distances. Run your sprayer at desired speed from flag to flag timing how long it takes to travel that distance. Then park sprayer and turn pump on. Collect water from a tip randomly and several for that time it took to travel X amount of feet based in tip spacing. The amount of water you caught is how much water you are putting down per acre.

You know, its funny how when somebody does something for a living, they explain it like its really easy. I was lost after the first sentence. I would probably have to forget two or three other things to remember that process. I burnt up a bunch of braincells in my 20s. I gotta be really careful about how hard i strain the ones i have left.

I’m not a good teacher nor at splainin things. But I can do them

Most of us can’t even differentiate between to, too and two or lose and loose or their and there.

And you’re wanting us to do this!?!? ^^^ 🙄🤔😂

Not a chance bro...