Lost hub last weekend and axle spindle hit the ground and bent. It's gone. I have called 20 places and can't find any welder set up to weld a new spindle on to be square accounting for camber and toe-in. Before everybody says buy a new axle it's an odd ball size and would have to be custom built. Anybody know a welder that can do this right? I'll drive if needed. Thanks.

www.abc-trailer-parts.com/

I have bought several axles from these folks. They will make whatever size you want. They located in Moulton. You will have more in new spindle and labor than a new axle. But I have welded new spindles on before also. I thinking 1.5 deg is what I allowed.

^^This^^

Forgot to add most welders will not weld on trailer spindles because of liability reasons.

Yes you can find a place to fix the axle, we had a few fixed with no problems before. But, you can buy an axle from any axle shop that will build it to the specs you provide. I had one made for my flatbottom trailer from MFI in Winchester Tennessee for $100. That's the easiest route

moundville metal works fixed mine

Buying from these folks. Seem very knowledgeable and very helpful. Thanks gbee