Posted By: Lockjaw
Scope rings for AR10 - 12/05/22 05:06 PM
What height would I need to mount a 2.5-10x44 scope with a 30mm main tube?
Posted By: James
Re: Scope rings for AR10 - 12/05/22 05:08 PM
Probably some Mediums. I usually end up ordering two when i'm unsure š
Posted By: Goatkiller
Re: Scope rings for AR10 - 12/05/22 05:23 PM
Cantilever mount and done. I see no advantage in trying to setup something else.
Posted By: Lockjaw
Re: Scope rings for AR10 - 12/05/22 08:04 PM
I am leary after having my Vortex one not keep the scope from moving. They are replacing it and the scope, but..... I just wonder if the semi auto is sort of like a slide hammer to the scope, if you know what I mean.
Posted By: ALMODUX
Re: Scope rings for AR10 - 12/06/22 02:41 AM
Well, I doubt Iād put anything other than high/extra high on top of any ARā¦..the stock/bore alignment is in line and you need much higher sights/rings (1-25-1.5ā) than on a regular hunting stockā¦.objective clearance isnāt the concern. Iād also pick a good, one piece (cantilever) over rings most days for an ARā¦.ADM, Larue, Bobro, Warne, Aero , etc.
Posted By: 2Dogs
Re: Scope rings for AR10 - 12/06/22 02:48 AM
If this will work , they're mighty fine , rock solid mounts.
https://www.opticsplanet.com/burris-ar-tactical-mounts.html
Posted By: ALMODUX
Re: Scope rings for AR10 - 12/06/22 03:02 AM
The Burris are heavyā¦.but weight isnāt a concern for many with ARs. If it is, the Aero Precision ultralight mount is one of the lighter options.
Posted By: Big Bore
Re: Scope rings for AR10 - 12/06/22 03:14 AM
Get the team Warne Cantilever. I have 5 of them and the others canāt touch them. The Burris isnāt bad though I have 2 of those.
Posted By: ALMODUX
Re: Scope rings for AR10 - 12/06/22 03:23 AM
Well, Iām pretty sure Iād pick JP, Geissele, Badger, Aad, and many others over the Warneā¦.not saying they arenāt good, but I would be skeptical that theyāre ābetterā than many othersā¦.thereās a TON of quality mounts out there, and the PEPR and even primary arms stuff are good for the $, but Iām partial to the Aero on hunting ARs.
Posted By: Lockjaw
Re: Scope rings for AR10 - 12/06/22 12:22 PM
What I have is a vortex sport 3 in offset. Since the scope is a vortex, having a matching mount seemed athletically good. It's not a cheap mount. But the first one did not keep the scope secure. Maybe it's a function of the BCA upper on a PSA lower , which I have corrected with a PSA upper now?
Posted By: BamaBoHunter
Re: Scope rings for AR10 - 12/06/22 01:46 PM
I got the Burris a few weeks ago for an AR 15 on sale on amazon for around $50.
Posted By: Lockjaw
Re: Scope rings for AR10 - 12/06/22 02:45 PM
I don't like the picitiny on top of the rings on those.
Posted By: BCLC
Re: Scope rings for AR10 - 12/06/22 02:59 PM
I don't like the picitiny on top of the rings on those.
Every mount comes with a set of smooth top ring caps as well as the picatinny caps